Cressington 108 auto manual

operating instructions for the Cressington Manual, sputter coater tool. This tool is intended for coating thin layer of gold conductive layer on non-conductive SEM samples. 2 SAFETY Must be trained and signed off to use this equipment. Record the tool malfunction, breakage, etc. in the log-sheet and send an email to staff. CRESSINGTON Auto Sputter Coater. The Cressington auto sputter coater offers the choice of manual or automatic operation. The specification also includes automatic vent (with a choice of vent gas) and argon purge control. The Cressington Auto sputter coater offers the choice of manual or automatic operation. The specification also includes automatic vent (with a choice of vent gas) and argon purge control. In automatic mode the coater can be controlled in two ways. The digital timer can be used to give repeatable coatings or the (optional) MTM controller can be used to terminate .

Operating Manual Cressington Sputter Coater for standard SEM/EDX applications Cressington Scientific Instruments Ltd 34 Chalk Hill Watford WD1 4BX UK Tel: (0) Fax: (0) Revision V4, March OPERATION of SPUTTER COATER Cressington AUTO 1. Place the specimen in the chamber and adjust height (we recommend about inch or 4 cm) from the target to the surface of the sample. 2. Close the lid carefully. 3. Press the RED BUTTON on the power strip next to the pump. The pumping starts. If you hear loud noise the lid is not closed. Cressington auto/SE sample coater You can also prefer to pages of the Cressington manual for guidelines for very thin coating.

Manual operation is used for more difficult samples when a wider range of operating conditions is required. The Auto is fitted with separate argon gas. Cressington Sputter Coater. This instrument is used for general coating of samples that will be imaged using scanning electron microscopes. The Auto Sputter Coater offers the choice of fully automated or manual operation. The specifications also include automatic vent (with a choice of vent gas).